Search Results

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR CORRECTIVE ACTION AND DISPOSITION SYSTEM FOR NONCONFORMING MATERIAL

1995-09-01

HISTORICAL

AS7106/2A

This Aerospace Standard is to be used as a supplement to either SAE AS7106 or SAE AS7107. This Standard is required for all suppliers seeking NADCAP General Quality Systems accreditation who have Material Review Board (MRB) authority. Suppliers seeking NADCAP General Quality Systems accreditation who are authorized by contract to conduct final MRB decisions shall comply with all of the requirements contained herein.

Standard

NATIONAL AERSPACE AND DEFENSE CONTRACTORS ACCREDDITATION PROGRAM (NADCAP)REQUIREMENTS FOR ACCREDITATION OF VALUE ADDED DISTRIBUTORS

1991-10-01

HISTORICAL

AS7202

This aerospace standard outlines minimum quality assurance requirements common to commodities which must be met by a "Value Added" distributor for third party accreditation.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM INSPECTION SYSTEM REQUIREMENTS

1994-07-01

HISTORICAL

AS7107

This Aerospace Standard establishes the minimum requirements necessary for NADCAP accreditation of an Inspection System that meets, at a minimum, MIL-I-45208. These requirements may be supplemented by additional requirements at the discretion of the NADCAP General Quality Systems Task Group. It is the intent of this standard to provide a harmonized quality standard that meets MIL-I-45208, MIL-STD- 45662, and the relevant portions of MIL-STD-1520. In addition to meeting these requirements as a minimum, an attempt has been made to harmonize the requirements of MIL-Q and the ISO9000 series of standards. Where similar requirements existed between these two standards, the more stringent requirement was imposed.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR STRIPPING

1995-03-01

HISTORICAL

AS7109/4

This Aerospace Standard (AS) is to be used as a supplement to SAE AS7109. In addition to the requirements contained in AS7109, the requirements contained herein shall apply to suppliers seeking NADCAP Coatings accreditation who are engaged in stripping of coated material.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR DIFFUSION WELDING

1995-03-01

HISTORICAL

AS7110/8

This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to the requirements contained in AS7110, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for diffusion welding.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP)PROGRAM DESCRIPTION

1990-07-02

HISTORICAL

AS7001

This standard describes the National Aerospace and Defense Contractors Accreditation Program (NADCAP) to accredit the capability of suppliers furnishing processes, products, and services for the aerospace and defense industries as provided for in specific programs.

Standard

NADCAP REQUIREMENTS FOR HEAT TREATING ACCREDITATION PROGRAMS

1993-06-10

HISTORICAL

AS7102

This Aerospace Standard (AS) establishes the minimum requirements for suppliers of heat treat services to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements as determined by NADCAP, but the audit checklist shall, at a minimum, assure that NADCAP Accredited Heat Treat Suppliers meet all of the requirements contained in this standard.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR HEAT TREATING

1995-11-01

HISTORICAL

AS7102A

This Aerospace Standard (AS) establishes the requirements for Heat Treating Accreditation by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements specified by the NADCAP Heat Treating Task Group. Using the audit checklist (AC7102) will ensure that accredited heat treat suppliers meet all of the requirements in this standard and all applicable supplementary standards. All instructions, procedures, tests and inspection records, etc., referenced herein shall be in writing; distribution of instructions and procedures (including all revisions) shall be recorded and controlled. The NADCAP Heat Treating Task Group recognizes SAE AS7004, SAE AS7106, and SAE AS7107 as equivalent to the systems questions of this document as noted in the NADCAP Auditor Handbook.

Standard

National Aerospace and Defense Contractors Accreditation Program Requirements for Heat Treating

2008-07-30

CURRENT

AS7102B

This Aerospace Standard (AS) establishes the requirements for Heat Treating Accreditation by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements specified by the NADCAP Heat Treating Task Group. Using the audit checklist (AC7102) will ensure that accredited heat treat suppliers meet all of the requirements in this standard and all applicable supplementary standards. All instructions, procedures, tests and inspection records, etc., referenced herein shall be in writing; distribution of instructions and procedures (including all revisions) shall be recorded and controlled. The NADCAP Heat Treating Task Group recognizes SAE AS7004, SAE AS7106, and SAE AS7107 as equivalent to the systems questions of this document as noted in the NADCAP Auditor Handbook.

Standard

Nadcap Requirements for Fusion Welding

2003-12-08

HISTORICAL

AS7110/5C

This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to the requirements contained in AS7110, the requirements contained herein shall apply to suppliers seeking Nadcap accreditation for fusion welding.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FUSION WELDING

1995-03-01

HISTORICAL

AS7110/5

This Aerospace Standard (AS) is to be sued to supplement AS7110. In addition to the requirements contained in AS7110, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for fusion welding.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FUSION WELDING

1997-11-01

HISTORICAL

AS7110/5A

This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to the requirements contained in AS7110, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for fusion welding.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FUSION WELDING

2000-09-01

HISTORICAL

AS7110/5B

This Aerospace Standard (AS) is to be used to supplement AS7110. In addition to the requirements contained in AS7110, the requirements contained herein shall apply to suppliers seeking NADCAP accreditation for fusion welding.

Standard

National Aerospace and Defense Contractors Accreditation Program (Nadcap) Requirements for Etch Processes (Macrostructure, Nital, Temper, Blue Etch Anodize)

2005-04-26

CURRENT

AS7108/2A

This document has been declared "CANCELLED" as of April 2005 and has been superseded by PRI AC7108/2. By this action, this document will remain listed in the Numerical Section of the Aerospace Standards Index noting that it is superseded by PRI AC7108/2. Cancelled specifications are available from SAE.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR ETCH PROCESSES (MACROSTRUCTURE, NITAL, TEMPER, BLUE ETCH ANODIZE)

1997-07-01

HISTORICAL

AS7108/2

This Aerospace Standard (AS) establishes the requirements for suppliers for Etching Processes to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). These requirements may be supplemented by additional requirements specified by NADCAP Chemical Processing Task Group. Using the audit checklist (AC7108/2) will ensure that accredited Chemical Processing suppliers meet all of the requirements in this standard and all applicable supplementary standards.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM REQUIREMENTS FOR FASTENER MANUFACTURING

1997-03-01

HISTORICAL

AS7113

This Aerospace Standard (AS) establishes the requirements for manufacturers of Fasteners to be accredited by the National Aerospace and Defense Contractors Accreditation Program (NADCAP). NADCAP accreditation is granted in accordance with SAE AS7003 after demonstrating compliance with the requirements herein. These requirements may be supplemented by additional requirements specified by NADCAP Fastener Manufacturing Task Group. Using the corrsponding Audit Criteria checklists (PRI ACs) will ensure that accredited Fastener Manufacturing suppliers meet all of the requirements in this standard and all applicable supplementary standards.

Standard

Nadcap Program Requirements

2008-01-07

HISTORICAL

AS7003D

This Aerospace Standard (AS) documents the requirements for implementing Nadcap industry consensus-based accreditation/certification programs.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM OPERATION

1990-07-01

HISTORICAL

AS7003

This Aerospace Standard (AS) documents the operating instructions, rules, policies, and practices of the Performance Review Institute (PRI), an affiliate of SAE. Covered in this standard are the operations of NADCAP committees, headquarters and field personnel, requirements for ongoing relations with suppliers, and procedures for conducting audits, continuing surveillance and accreditation. Supporting SAE NADCAP Aerospace Standards provide supplier requirements for complying with each individual accreditation process.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM REQUIREMENTS

1997-03-01

HISTORICAL

AS7003B

This Aerospace Standard (AS) documents the requirements for implementing NADCAP industry consensus-based accreditation programs.

Standard

NATIONAL AEROSPACE AND DEFENSE CONTRACTORS ACCREDITATION PROGRAM (NADCAP) PROGRAM OPERATION

1992-10-30

HISTORICAL

AS7003A

This Aerospace Standard (AS) documents the procedures for implementing third-party accreditation programs administered by NADCAP.